 |
| Quantity: | |
|---|---|
Product overview:
The surface of multi-function fire nozzle produced by our company adopts hard anodic oxidation treatment to prevent chemical corrosion and mechanical damage; The maximum working pressure is 16 kg. Multi-gear adjustment is available.
Quick display bar for product details:
Gun barrel, outlet pipe, adjusting ring, bayonet-type 65 interface, interface flange and fixed cover: extrusion forming of 6061-T6 seamless pipe, with high strength, no weld trace after surface oxidation, solid and light weight.
The hard anodic oxide layer on the surface can prevent chemical corrosion and mechanical damage. High hardness, good wear resistance, effective anti-scratch and smooth surface, beautiful and generous.
Bow-type handle, guard ring, control ring, nozzle handle and nozzle head adopt Polyamide 66, which is of the performance of high hardness, corrosion resistance, abrasion resistance and impact resistance. It will not melt in extremely hot environment, and the fire gun can still be used normally, so it is a good thermal insulator; At the same time, there will be no frost cracking at low temperature.
PTFE ball: corrosion resistance, good wear resistance, long service life; Good self - lubricating performance, flexible rotation, light.
Pin shaft and screw, guide and standard parts are made of national standard 304 stainless steel, wear-resistant and rust free.
Product details:
The adjustment of flow rate and flushing gear is realized by rotating the adjusting ring, and the available flow rate is labeled on this surface. By rotating this ring to the corresponding flow gear, the corresponding flow of the fire nozzle at the rated working pressure of 6kg can be obtained.
There is also a corresponding flushing gear on the regulating ring, which enables the water flow to flush out the particles stuck in the waterway.
Select jet mode: The fire nozzle can be switched among modes of straight stream, safeguarding water stream and 120°fog stream by continuously rotating the nozzle head. The tactile markings on the nozzle head allow the operator to clearly know the current jet mode, even when wearing gloves in the dark.
Product overview:
The surface of multi-function fire nozzle produced by our company adopts hard anodic oxidation treatment to prevent chemical corrosion and mechanical damage; The maximum working pressure is 16 kg. Multi-gear adjustment is available.
Quick display bar for product details:
Gun barrel, outlet pipe, adjusting ring, bayonet-type 65 interface, interface flange and fixed cover: extrusion forming of 6061-T6 seamless pipe, with high strength, no weld trace after surface oxidation, solid and light weight.
The hard anodic oxide layer on the surface can prevent chemical corrosion and mechanical damage. High hardness, good wear resistance, effective anti-scratch and smooth surface, beautiful and generous.
Bow-type handle, guard ring, control ring, nozzle handle and nozzle head adopt Polyamide 66, which is of the performance of high hardness, corrosion resistance, abrasion resistance and impact resistance. It will not melt in extremely hot environment, and the fire gun can still be used normally, so it is a good thermal insulator; At the same time, there will be no frost cracking at low temperature.
PTFE ball: corrosion resistance, good wear resistance, long service life; Good self - lubricating performance, flexible rotation, light.
Pin shaft and screw, guide and standard parts are made of national standard 304 stainless steel, wear-resistant and rust free.
Product details:
The adjustment of flow rate and flushing gear is realized by rotating the adjusting ring, and the available flow rate is labeled on this surface. By rotating this ring to the corresponding flow gear, the corresponding flow of the fire nozzle at the rated working pressure of 6kg can be obtained.
There is also a corresponding flushing gear on the regulating ring, which enables the water flow to flush out the particles stuck in the waterway.
Select jet mode: The fire nozzle can be switched among modes of straight stream, safeguarding water stream and 120°fog stream by continuously rotating the nozzle head. The tactile markings on the nozzle head allow the operator to clearly know the current jet mode, even when wearing gloves in the dark.
